Concrete Restoration

nivo slider image nivo slider image nivo slider image nivo slider image nivo slider image nivo slider image nivo slider image

Some of the costly features of urban developments include concrete sidewalks, curb and gutter, driveway aprons and warehouse floor slabs. Settlements within these structures can cause uneven surfaces, water ponding and trip hazards associated with faulting. Geo Grout can correct the problem by performing what is commonly known as slab jacking or mud jacking.

Concrete Sidewalks

Settled concrete sidewalks are slab jacked, by coring strategically placed injection holes along the section of sidewalk. Grout injection is carried out at each location, allowing the sidewalk to be uniformly lifted back to specified grade. This method of slab jacking works well for both separate and monolithic sidewalks, by varying the injection hole pattern.

During the lifting process, the grout flow properties allow for filling of all the available void area beneath the slab.

Upon completion, all core holes are filled with a high strength rapid set grout and finished to match the existing structure.

Concrete Curb and Gutter

Curb and Gutter

Mud jacking settled concrete curb and gutter poses an additional challenge, due to the minimal allowable surface area available to effect lift. Geo Grout utilizes custom designed mechanical devices to effect initial lift of these structures. Following the initial lift, the structure is raised to specified grade through the combined process of mechanical lift and pressure grouting techniques.

This ensures that the entire void beneath the concrete curb and gutter is filled. The procedure is also applicable for lifting settled concrete drainage swales.

Upon completion, all core holes are filled with a high strength rapid set grout and finished to match the existing structure.

Residential Concrete Driveway

Residential Concrete Driveway

Lifting of settled residential concrete driveways require special attention due to the typical low flexural strengths associated with standard concrete and particularly exposed aggregate concrete driveways. Geo Grout utilizes a high flow grout mix, which minimizes point loading, hence eliminating or significantly reducing stress cracks during the lifting process. Pressure grouting is carried out at strategically placed injection points, to obtain uniform lift.

Upon completion, core holes within standard concrete driveways are filled with a high strength rapid set grout and finished to match the existing structure. On exposed aggregate driveways, the existing cores are replaced and grouted to match the original surface.

The Payoff

Conventional concrete restoration of settled concrete flatwork requires saw cutting, removal and disposal of the concrete, leveling the subgrade with a granular base, reforming and replacing the concrete flatwork. In addition, the adjacent landscaping and/or pavement requires rehab. This procedure normally takes several days to complete and is dependant on weather conditions.

Alternatively a typical settled concrete section can be slab jacked in 20 to 40 minutes. In most cases the section can be returned to service upon completion. This significantly reduces any inconveniences to the site residence. Also there is little or no disturbance to adjacent structures or landscaping resulting in less environmental impact.

Because of the reduced down time and little or no rehab to adjacent structures, slab jacking of settled concrete flatwork has proven to be an economical, viable alternative to removal and replacement.